Quality at reasonable prices


FIlter press for wine industry

We started new product line AMHR 500 a 630 filter press for wine indutry. pruduct brief

wine pressure1wine pressure2wine pressure3

Chemical WWTP Ruzyne Airport

We have produced and delivered chemical treatment plant for the Prague Ruzyne Airport servicing, washing and cleaning aircraft.

Deliveries to Egypt

We continue to supply equipment for the recycling of water to Egypt.


Company address

U Hriste 2/82
750 02 Prerov - Dluhonice
Czech Republic, EU
Tel./Fax: +420 581 212 505
+420 581 212 506
+420 581 212 591
E-mail: info@a-azv.cz
Auxiliary equipment

Filling pump

Filling pump is in service to transport the suspension into the filter press. His right choice and control can largely affect the results of filtration.

Filling pressure filter press is standard in the range of 6 to 15 bar.

types of pumps:
  • particularly suitable for the performance of the filter press,
  • require measurement and control during the filtration,
  • pumping abrasive and aggressive substances,
  • possibility of front-end multiplier pressure 1:2 or 1:4 for the higher pressure performance
  • displacement pumps suitable for pumping non-abrasive substance,
  • flow control reservoir with a pressure switch or frequency converter.
  • displacement pumps suitable for pumping abrasive and corrosive substances,
  • regulation by the reservoir and pressure switch or frequency converters.
  • pumps suitable for filtration, with a very fast course - kaolin, etc.
  • without regulation or with frequency converter.

As an integral part of measuring and control system and pumps offer containment and control valves and piping. Pump body material is dependent on the properties of suspension. The most commonly used PP and stainless steel, if necessary by steel tř.11, PE, PVDF and others.

Photo device Photo device Photo device Photo device Photo device Photo device

Hydraulic stations and hydraulic cylinders

hydraulics Hydraulics Hydraulics Hydraulics Hydraulics

Conveyors for transport filter cake

In cases where the destruction of the filter cakes such as transporting the container outside the building or for further processing (kaolin, ceramic, etc.) We can supply various types of conveyors and material design.

Coming out cake can be diverted directly through the hopper to the conveyor, or the shredder or Smoothing cakes. These devices are primarily used for preparation of filter cake for microwave oven or vacuum presses.

Types of conveyors:
  • belt conveyors,
  • chain conveyors - Redler,
  • screw conveyors,
  • ripper cakes.
conveyors conveyors conveyors

Supporting steel structure

If there is a need to put technology to the steel structure offers our company the processing of documentation, production, supply and installation of steel structures, including technology.

steel Steel steel

Tipping containers

Our hinged containers are designed especially for filter presses with format plates 400x400 mm to 800x800 mm

Containers produced in several versions with optional width, so as to best suit the size of the filter press.

Main parts are hinged flatbed and chassis with wheels and a pair of closed profiles designed for engagement of the forklift slides.

Material design:
  • standard - steel class 11 + chemically resistant coating
  • or steel class 17
  • benefits - a small filter presses need not be installed on a steel structure, just beneath them to place pop-up container
  • Misalignment container - lockinf off latch misalignment occurs spontaneously to the bucket.
container container container container

Production of low-voltage and high-voltage switchgear, instrumentation, ASRTP

  • programmed in software and Siemens AMIT
  • deliver Siemens PLC, AMIT
aut aut aut aut